Making THC dabs at home is becoming more and more popular among cannabis enthusiasts.
It’s not just about getting a higher concentration of THC, it also offers an easier and quicker way to use marijuana, as well as offering a new way to experience the flavors and effects of different strains.
In this blog post, we’ll walk you through the process of making your own THC dabs at home.
From gathering the right materials to understanding the science behind the process, read on to learn everything you need to know about THCa extraction and how to make your own THC dabs.
Table of Contents
Get Your Medical Card
If you want to make THC dabs at home, you’ll need to get your medical card first.
To do this, you’ll need to consult with a licensed medical marijuana doctor and get a recommendation for use. Once you have your card, you can purchase cannabis concentrates from a dispensary.
Types of THC Dabs
There are many ways to make THC dabs, but the most common methods involve using either a butane or propane torch. Butane is the most commonly used method, as it is cheaper and easier to find. Propane, on the other hand, produces a cleaner dab.
The first step in making THC dabs is to decarboxylate the cannabis. This can be done by baking the cannabis in an oven at 240 degrees Fahrenheit for about 45 minutes.
Once the cannabis is decarboxylated, it can be ground up into a fine powder using a coffee grinder or food processor.
Next, the cannabis powder must be placed into a heat-resistant container, such as a glass jar or Pyrex dish.
A small amount of water should be added to the container, just enough to wet the powder without submerging it. The container should then be placed in a saucepan filled with water and brought to a boil.
Once boiling, the heat should be turned down so that the water is simmering. The lid should be placed on the container and left to simmer for 15-20 minutes.
After this time, the lid should be removed and any remaining water evaporated off by increasing the heat slightly.
At this point, the cannabis oil will have separated from the plant matter and will be floating on top of the water. It can now be scooped off with a spoon and placed into another heat-resistant container for storage
How to Make Dabs
If you’re looking to make your own THC dabs at home, there are a few things you’ll need to know. For starters, dabs are a concentrated form of cannabis that is made by extracting the THC from the plant material. This can be done using a variety of methods, but the most common is to use butane or CO2.
Once you have your extracted THC, you’ll need to purify it. This can be done by boiling off the butane or CO2, or by using a solvent like alcohol to remove any impurities. Once your THC is purified, it’s time to turn it into a dab.
There are a few ways to do this, but the most common is to use a heated nail and a glass pipe. First, heat your nail with a torch until it’s red hot. Then, place your glass pipe over the nail and hold it there for a few seconds. Next, place your purified THC on the nail and inhale the vapor through the pipe.
You can also make dabs using an oil rig. This is similar to using a glass pipe, but you’ll need to use a special type of glass called borosilicate.
To make dabs with an oil rig, simply heat up your borosilicate nail with a torch and then place your purified THC on the nail. Inhale the vapor through the mouthpiece of the oil rig and enjoy!
NEW CUSTOMER DISCOUNT
15% OFF YOUR ENTIRE ORDER FOR NEW CUSTOMERS USE CODE WELCOME15!
Make Dabs Without Solvents
If you want to make THC dabs without using any solvents, there are a few methods you can use. The first method is to use a cannabis-infused oil or butter.
You’ll need to heat up the oil or butter until it’s hot enough to melt the THC concentrate. Then, simply add your THC concentrate to the hot oil or butter and stir until it’s fully dissolved.
Another solvent-free method for making THC dabs is to use hash oil. Hash oil is already in a liquid form, so all you need to do is add it to your dab rig and heat it up.
Once it’s nice and hot, take your dab tool and scoop up some of the hash oil. Then, apply it to your dab surface and enjoy!
The last solvent-free method for making THC dabs is to use tinctures. Tinctures are basically just cannabis-infused alcohols, so they’re already in a liquid form.
To use a tincture for making THC dabs, simply add it to your dab rig and heat it up. Once it’s nice and hot, take your dab tool and scoop up some of the tincture. Then, apply it to your dab surface and enjoy!
What You’ll Need
- A cannabis concentrate such as BHO, CO2 oil, PHO, etc.
- A dab rig or e-nail
- A dab tool
- A heat source ( torch lighter, hot knife, etc.)
If you want to make THC dabs at home, you’ll need a few things. First, you’ll need a cannabis concentrate such as BHO, CO2 oil, or PHO. Next, you’ll need a dab rig or e-nail to vaporize the concentrate.
You’ll also need a dab tool to apply the concentrate to the rig. Finally, you’ll need a heat source to vaporize the concentrate. A torch lighter or hot knife will work nicely.
To make THC dabs at home, you’ll need to gather a few supplies first. You’ll need a cannabis concentrate, a rig or dab setup, and a torch. If you don’t have a torch, you can use a stovetop burner set to high heat.
Once you have your supplies, it’s time to start heating up your nail or banger. You want the nail or banger to be extremely hot before you add your concentrate. This helps to vaporize the concentrate completely and prevents it from sticking to the side of the nail or banger.
Once your nail or banger is heated, use a dab tool to place your concentrate onto it. Inhale the vapors slowly and deeply. You should feel the effects of the THC almost immediately. Enjoy!
Alternative Ways to Make Dabs
Dabbing has become a popular way to consume THC, as it provides a quick and potent dose of the active ingredient. However, making dabs at home can be a difficult and dangerous process.
There are alternative ways to make dabs that are much safer and easier to do at home. One popular method is to use hash oil or wax instead of trying to extract the THC from plant material yourself.
Hash oil and wax can be purchased online or at some dispensaries. They can also be made at home, although this is more complicated and requires access to specialized equipment.
Once you have your hash oil or wax, you will need to find a way to vaporize it. This can be done with a regular e-cigarette, although dedicated dab rigs are also available.
Vaping hash oil or wax is much safer than trying to extract THC from plant material, as there is no risk of explosion or fire. It also produces a much purer form of THC, which leads to a more intense experience.
How to Use Dabs
If you’re new to dabs, the process of using them can seem a bit daunting. But don’t worry – we’re here to help! Here’s a step-by-step guide on how to use dabs:
- Start with a clean and well-lit workspace. You’ll need a dab rig (a special water pipe for smoking dabs), a dab tool, and a heat source (like a butane torch).
- Place your dab on the nail of your rig. Use the dab tool to apply just enough pressure so that the dab stays in place.
- Apply heat to the nail with your torch until it’s red hot. Then, use the dab tool to touch the dab to the nail and inhale slowly.
- Hold the hit in for as long as you can before exhaling. Repeat as necessary!
Consuming Dabs in a Bowl
Assuming you already have some sort of weed concentrate on hand, the process of consuming dabs in a bowl is pretty simple.
Start by packing the bowl with your favorite smoking material. If you’re using regular flour, we recommend starting with a small amount to avoid wasting your concentration.
Then, place the dab directly on top of the bowl’s contents and light it up as you would anything else. Inhale deeply and enjoy!
As always, be sure to start slow when consuming any new type of cannabis product. Dabs are incredibly potent, so it’s important to gauge your tolerance before indulging too much.
If you find yourself feeling uncomfortably high, simply stop consuming and wait for the effects to wear off. With that said, dabs can be an incredibly enjoyable way to consume cannabis, so don’t be afraid to give them a try!
Consuming Dabs with a Vape Pen
Consuming dabs with a vape pen is one of the most efficient ways to enjoy THC. Vape pens provide an easy and discreet way to consume cannabis, and they can be used with a variety of different types of concentrates.
Dabbing with a vape pen is simple: just load your concentrate of choice into the chamber and heat it up. Inhale slowly and steadily until you’ve had your fill.
You’ll likely feel the effects of the THC almost immediately, so start SlowMotionVideoswith small doses and work your way up as needed.
If you’re new to dabbing, we recommend starting with a low-temperature setting on your vape pen. This will help to prevent any accidental burns or too much vapor production.
Once you’re comfortable with the process, you can experiment with different temperatures to find what works best for you.
As always, be sure to consume cannabis responsibly and only use products that are legal in your area. Happy dabbing!
Consuming Dabs with a Joint
If you enjoy smoking joints, you can easily turn your experience up a notch by adding some THC dabs to the mix.
By doing this, you’ll be able to get a much more potent hit of THC that will send you soaring to new heights. Here’s a simple guide on how to make THC dabs at home and consume them with a joint:
First, you’ll need to gather your supplies. You’ll need some sort of cannabis concentrate (such as BHO or PHO), butane or propane, a Pyrex dish or silicone mat, and a joint. Once you have all of your supplies, it’s time to get started.
To start, place your Pyrex dish or silicone mat on top of an electric stove burner set to low heat.
Then, place your cannabis concentrate in the dish or on the mat and let it melt down into a liquid form. Next, take your butane or propane and hold it about 6 inches above the liquid concentrate.
Slowly release the butane or propane into the dish/mat so that it falls in as a fine mist. Be sure not to release too much at once as this can cause the liquid to boil over. Continue this process until all of the concentrate has been vaporized.
Once all of the concentrate has been vaporized, carefully remove the dish/mat from the heat source and allow it to cool for a few seconds. Then, using a dabber
Get Your Medical Card
There are a few things you need to know before you can make THC dabs at home. First, you’ll need to get your medical card.
You can do this by going to your state’s website and following the instructions. Once you have your medical card, you’ll be able to purchase the necessary supplies from a dispensary.
Next, you’ll need to gather your supplies. You’ll need some sort of cannabis concentrate, as well as a way to heat it. A popular method is using a butane torch, but you can also use a dab rig or an e-nail. Once you have your concentrate and heating method, you’re ready to start making dabs!
Simply place a small amount of concentrate on your nail or in your rig, and heat it up until it turns into a liquid. Then, use a dabber tool to apply the liquid to your dab rig or e-nail. Inhale slowly and enjoy!
Should You Dab Cannabis?
Dabbing has become a popular way to consume cannabis, especially among those who are looking for a more potent experience. But is dabbing right for you? Let’s take a look at some of the things you should consider before taking your first dab.
The most important thing to keep in mind when dabbing is that the THC concentration is much higher than what you may be used to with other methods of consumption.
For this reason, it’s important to start slow and go low when you first start out. A good rule of thumb is to start with a pea-sized amount and increase from there as needed.
Another thing to consider is the type of cannabis you’ll be using. If you’re using a concentrate that is high in THC, then you’ll want to be extra careful not to overdo it.
Start with a small amount and work your way up until you find the perfect dose for you.
And finally, don’t forget that dabbing can be messy! Make sure you have all the supplies you need (including a silicone mat or something similar) before getting started.
Once you’ve got everything ready, follow these simple steps and enjoy your THC-infused dab!
There are several benefits to making THC dabs at home. For starters, it’s a much cheaper way to enjoy cannabis concentrates.
You can also customize the potency and flavor of your dabs, ensuring that each hit is exactly to your liking. Additionally, making dabs at home is a relatively simple process that doesn’t require any expensive equipment.
So, if you’re looking to cut down on your cannabis spending or simply want to have more control over your dabbing experience, read on for a step-by-step guide to making THC dabs at home.
If you’re not careful, making THC dabs at home can be dangerous. The process of heating and cooling the oils can be tricky, and if not done correctly, can lead to an explosion.
Another downside to making your own THC dabs is that it can be messy. The oil can get everywhere, and it’s hard to clean up.
Finally, unless you have a really good ventilation system, the fumes from making THC dabs can be overwhelming. If you don’t have proper ventilation, you could end up getting sick from inhaling the fumes.
Get Our Solvent-Free Wax Dab Recipe
There are a few methods for making THC dabs at home, but the easiest and most effective way is to use a solvent-free wax. This type of wax can be made with just a few simple ingredients and doesn’t require any dangerous chemicals or solvents.
To make our solvent-free wax dab recipe, you’ll need:
- 1 gram of cannabis trim or bud (decarboxylated)
- 1 ounce of coconut oil
- 1/4 teaspoon of sunflower lecithin
- Decarboxylate your cannabis trim or bud by heating it in an oven at 220 degrees Fahrenheit for 25 minutes. This process will activate the THC in the plant material so that it can be ingested.
- Add the decarboxylated cannabis, coconut oil, and sunflower lecithin to a small saucepan over low heat. Stirring frequently, cook until all of the ingredients are melted together.
- Remove from heat and pour into a silicone mold or storage container. Allow to cool and solidify completely before using.
To use, simply place a small amount of the wax on your dab rig or vaporizer and enjoy! The effects of THC dabs can be very strong, so start with a small amount and increase as needed.
Tips for Using THC Dabs at Home
When it comes to consuming THC, there are many ways to do it. One of the most popular methods is dabbing. Dabbing is a process of using a concentrated form of cannabis that is then vaporized and inhaled.
This method can be done at home with some simple supplies and a little bit of know-how.
Here are some tips for using THC dabs at home:
- Get the right supplies: In order to dab, you will need a few things including a nail, a dome, a torch, and cannabis concentrate. You can find all of these items at your local head shop or online.
- Prepare your nail: Once you have all of your supplies, it’s time to prepare your nail. Start by heating up your torch and then apply the heat to your nail until it’s red hot. Then, let it cool for about 30 seconds before applying the cannabis concentrate.
- Take your dab: Now it’s time to take your dab! Put the dome over the nail and inhale slowly while you count to 10. Then, remove the dome and exhale slowly.
- Enjoy!: You should now be feeling the effects of the THC from your dab! Sit back, relax, and enjoy!
Be Mindful of Heat Levels
As with any cannabis product, it is important to be mindful of the potency of THC dabs. Start with a small amount and see how it affects you before consuming more.
Additionally, pay attention to the temperature at which you heat your dab. Too much heat can result in an unpleasant taste and lost potency.
Browse popular vape collections:
- Nicotine Disposables
- 2000 Puff Nicotine Disposable Vapes
- 2500 Puff Nicotine Disposable Vapes
- 5000 Puff Nicotine Disposable Vapes
- 6000 Puff Disposable Nicotine Vapes
- 7000 Puff Nicotine Disposable Vapes
- Disposable Vape Deals
- Best Vape Brands
- 8000 Puff Nicotine Disposable Vapes
- 9000 Puff Nicotine Disposable Vapes
- 5% Nicotine Disposable Vapes
- Rechargeable Nicotine Disposable Vapes
- Vape Coils
- Dab Wax Pens
- Dab Wax Pen Battery
- Yocan Vapes
- Vape Cases
Purchase Dabs from a Licensed Dispensary
Making dabs at home is a process that can be completed with just a few simple supplies. However, it’s important to purchase your cannabis concentrate from a licensed dispensary. This ensures that the product is safe and of high quality.
When purchasing dabs from a dispensary, you’ll want to look for a product that is lab-tested and free of contaminants. The staff at the dispensary should be able to help you find a product that meets your needs.
Once you’ve found a suitable product, it’s time to get started making your dabs. The process is relatively simple and only requires a few minutes of your time.
First, heat your nail or banger using a torch until it’s red hot. Then, place the dab on the nail and inhale the vapor through a water pipe or dab rig. Enjoy your homemade THC dab!
Keep Your Dab Device Clean
To ensure that your THC dabs are of the highest quality, it is important to keep your dab device clean. Here are some tips on how to do so:
- Use a soft cloth or brush to remove any residue from the surface of your device.
- Soak your device in isopropyl alcohol for several hours, then rinse it with clean water.
- Repeat steps 1 and 2 as needed to maintain a clean surface on your device.
Get a Medical Marijuana Card
There are a few things you need in order to make THC dabs at home. First, you’ll need to get a medical marijuana card. This will allow you to purchase the cannabis concentrate and other supplies needed for making dabs.
To get a medical marijuana card, you’ll need to visit a dispensary and speak with a qualified medical professional. They will assess your condition and determine if you would benefit from using cannabis. If they recommend it, they will help you complete the paperwork needed to obtain your card.
Once you have your card, you can purchase cannabis concentrates and other supplies needed for making dabs. Be sure to ask your dispensary staff for advice on which products are best suited for making THC dabs.